1/4" short ratchet handle ALYCO
- Ratchet Wrench for tightening with 1/4" sockets. A short handle allowing tightening in areas with little room to manoeuvre, or for operations that do not need high tightening torques
- Very precise tightening thanks to the 72-tooth mechanism, which allows tightening with a very exact 5-degree step
- Ratchet made of chrome-vanadium steel, maximum quality and wear resistance.
- Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life. Chrome surface treatment extending its service life and preventing oxidation
- Can be used with 1/4" square-drive sockets and a T-handle. It can also be used with extension bars, a universal joint, adapters, etc. to increase its functions.
Ratchet Wrench for tightening with 1/4" male square-drive sockets. Short-handle series, 110mm.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/4" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
Adding to this versatility is the short handle, which allows tightening in areas with little room to manoeuvre, or provides a very short tool when large tightening torques are not needed.
The ergonomic two-material handle allows tightening without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
Durable, corrosion-resistant, with a non-slip handle, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, industrial maintenance, and even domestic use.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/4" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
Adding to this versatility is the short handle, which allows tightening in areas with little room to manoeuvre, or provides a very short tool when large tightening torques are not needed.
The ergonomic two-material handle allows tightening without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
Durable, corrosion-resistant, with a non-slip handle, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, industrial maintenance, and even domestic use.
| Product | Availability | Drive square size |
Length |
|
|---|---|---|---|---|
| 1/4 DR. STUBBY RATCHET HANDLE Code 192136 Technical documentation | High level | 1/4" | 110 mm |