Alyco

Ficha técnica

3/4 DR. METAL RATCHET HANDLE

Code
192555
EAN-13
8421504925552
Drive square size Length
3/4" 500 mm
  • Ratchet Wrench for tightening with 3/4" sockets. An extra-strong ergonomic handle allowing high tightening torques and access to hard-to-reach spaces.
  • Very effective tightening thanks to the 24-tooth mechanism, which allows tightening with a 15-degree step. High tightening capacity, even making it possible to use a T-handle to increase the tightening torque.
  • Ratchet made of chrome-vanadium steel, maximum quality and wear resistance. High tightening torque, allowing high-force tightening without damaging the wrench. Can be used with 3/4" square-drive sockets and a T-handle. It can also be used with extension bars.
  • Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life. Chrome surface treatment extending its service life and preventing oxidation.
  • Very useful for tightening heavy machinery, tractors, trucks, agricultural machinery, etc.

Go to main product

Data sheet

  • Ratchet Wrench for tightening with 3/4" sockets. An extra-strong ergonomic handle allowing high tightening torques and access to hard-to-reach spaces.
  • Very effective tightening thanks to the 24-tooth mechanism, which allows tightening with a 15-degree step. High tightening capacity, even making it possible to use a T-handle to increase the tightening torque.
  • Ratchet made of chrome-vanadium steel, maximum quality and wear resistance. High tightening torque, allowing high-force tightening without damaging the wrench. Can be used with 3/4" square-drive sockets and a T-handle. It can also be used with extension bars.
  • Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life. Chrome surface treatment extending its service life and preventing oxidation.
  • Very useful for tightening heavy machinery, tractors, trucks, agricultural machinery, etc.

    • Overview

    Ratchet Wrench for tightening with 3/4" male square-drive sockets. With a detachable handle.
    These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
    The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
    At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
    These ratchet wrenches are for tightening with 3/4" square-drive sockets.
    They comply with the DIN 3122 and ISO 3315 standards.
    The ratchet has a 24-tooth rotation mechanism, so each rotation step corresponds to 15 degrees of circumference, giving a good tightening.
    It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
    The ergonomic handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening.
    The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
    The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
    Tightening of the ratchet can be extended with an extension bar.
    Durable, corrosion-resistant, with a non-slip handle, high torque, suited to long working periods.
    Widely used for holding or removing hexagonal-head screws and nuts.
    Very suitable for tightening nuts in industry, construction, industrial maintenance, tractors, trucks, heavy machinery, etc.

    Technical characteristics

    Wrench type:
    Detachable handle. The handle and head can be separated.
    Use:
    Used for tightening or removing screws by fitting sockets or accessories (extension bars, universal joints, adapters…), with a 3/4" female square drive.
    Number of teeth / swing angle:
    24 teeth / 15º of rotation per tooth
    Head size:
    Width 64 mm / height 60 mm
    Head material:
    Closed head. Internal mechanism made of chrome-vanadium steel
    Maximum clamping force:
    1553 N.m / 158 kg.m (10% above DIN 1412 N.m standard)
    Reversible:
    Yes. Easy-to-use reverse lever, thumb-operated.
    Socket extractor:
    Yes. Pressing the head button ejects the socket fitted on the head effortlessly.
    Handle type:
    Straight metal handle. Tubular shape. Made of steel.
    Grip shape:
    Cylindrical shape. Diameter of 24 mm.
    Grip material:
    Tubular steel grip. Knurled handle.

    Finishes

    Color:
    Grey
    Material:
    Chrome-vanadium steel body and steel handle
    Finish:
    Chrome-plated body

    Certifications

    Certification:
    DIN 3122

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    2.5840 50.00 6.40 6.00

    Documents

    • Certification 1