Torque wrench 1", 300-1500 Nm, ALYCO
- High torque accuracy (+/-3%), thanks to its design and the precision of the pre-set adjustment, aided by the lock for the desired torque.
- Long service life and accuracy thanks to the chrome vanadium steel head, the non-slip handle and the torque adjustment mechanisms.
- High safety and ease of use thanks to the head with reversible ratchet and socket ejector and the precisely dimensioned square drive.
- Tightening guarantee through compliance with DIN6789 and an individual calibration certificate and serial number.
- Comfortable tightening thanks to the possibility of reversing the tightening rotation direction. Very practical case for transport.
Torque Wrench made of chrome-vanadium steel, with general high-hardness heat treatment, flat steel tube shaft and non-slip ergonomic handle.
Head and internal mechanism made of chrome-vanadium steel, with tightening-direction reverser and socket ejector. 1" square drive with socket retention ball. 24-tooth mechanism with a step every 15 degrees.
Flat tube for access to reduced or confined spaces.
Non-slip ergonomic handle with a lever to lock the desired torque setting.
Window display with a torque scale in N.m and Lb.ft.
Torque accuracy of +/-3%. Accuracy of 2.0N.m. An audible alert sounds for both clockwise and anticlockwise tightening.
Torque setting adjusted by turning the wheel on the handle, checking the value in the window, and locking the setting with the handle's safety catch.
When tightening, once the desired force is reached, an audible alert (click) and a vibration are emitted. At that point, tightening is not disabled, so you can continue tightening.
With a vernier scale for precise adjustment of the desired torque.
The wrench complies with the DIN 6789 standard, and comes with a calibration certificate and an individual serial number.
Supplied in an individual case with instructions for use and certificate.
It is recommended to calibrate the wrench every 5,000 uses or 12 months.
A mechanism repair kit is available.
Very useful for automotive tightening, and medium-effort tightening torques.
Especially useful for repairs, vehicle workshops, cars, vans, etc.
Head and internal mechanism made of chrome-vanadium steel, with tightening-direction reverser and socket ejector. 1" square drive with socket retention ball. 24-tooth mechanism with a step every 15 degrees.
Flat tube for access to reduced or confined spaces.
Non-slip ergonomic handle with a lever to lock the desired torque setting.
Window display with a torque scale in N.m and Lb.ft.
Torque accuracy of +/-3%. Accuracy of 2.0N.m. An audible alert sounds for both clockwise and anticlockwise tightening.
Torque setting adjusted by turning the wheel on the handle, checking the value in the window, and locking the setting with the handle's safety catch.
When tightening, once the desired force is reached, an audible alert (click) and a vibration are emitted. At that point, tightening is not disabled, so you can continue tightening.
With a vernier scale for precise adjustment of the desired torque.
The wrench complies with the DIN 6789 standard, and comes with a calibration certificate and an individual serial number.
Supplied in an individual case with instructions for use and certificate.
It is recommended to calibrate the wrench every 5,000 uses or 12 months.
A mechanism repair kit is available.
Very useful for automotive tightening, and medium-effort tightening torques.
Especially useful for repairs, vehicle workshops, cars, vans, etc.
| Product | Availability | |
|---|---|---|
| LLAVE DINAMOMÉTRICA 1' 300-1500 NM Code 192948 Technical documentation | High level |