Insulated 1/2" ratchet ALYCO
- Insulated Ratchet Wrench with a special plastic coating that prevents the hand from contacting the metal, protecting against possible electric shocks of up to 1000V. With a certificate of compliance with the VDE standard.
- Ratchet Wrench for tightening with 1/2" sockets. An ergonomic handle allowing high tightening torques and access to hard-to-reach spaces.
- Ratchet made of chrome-vanadium steel, maximum quality and wear resistance. High tightening torque, allowing high-force tightening without damaging the wrench. Very precise thanks to the 45-tooth mechanism, which allows tightening with an 8-degree step.
- Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life.
- Can be used with 1/2" square-drive sockets and a T-handle. It can also be used with extension bars, a universal joint, adapters, etc. to increase its functions. These sockets and extension bars can also be insulated.
Ratchet Wrench for tightening with 1/2" male square-drive sockets. With protection up to 1000V AC and 1500V DC.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are covered with a plastic protection that prevents any possible transmission of electric current, which could cause electrocution or burns.
These ratchet wrenches are for tightening with 1/2" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards. Also with the EN 60900 standard for insulated tools.
The ratchet has a 45-tooth rotation mechanism, so each rotation step corresponds to 8 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
The ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
The plastic protection carries VDE certification, the German certification body, meeting the protection standard of 1000V AC and 1500V DC.
Durable, corrosion-resistant, with a non-slip handle, high torque, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, construction, industrial maintenance, and even domestic use.
It also provides great safety in use in locations or machinery with possible electrical risk.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are covered with a plastic protection that prevents any possible transmission of electric current, which could cause electrocution or burns.
These ratchet wrenches are for tightening with 1/2" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards. Also with the EN 60900 standard for insulated tools.
The ratchet has a 45-tooth rotation mechanism, so each rotation step corresponds to 8 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
The ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
The plastic protection carries VDE certification, the German certification body, meeting the protection standard of 1000V AC and 1500V DC.
Durable, corrosion-resistant, with a non-slip handle, high torque, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, construction, industrial maintenance, and even domestic use.
It also provides great safety in use in locations or machinery with possible electrical risk.
| Product | Availability | Drive square size |
Length |
|
|---|---|---|---|---|
| INSULATED 1/2 DR. RATCHET HANDLE Code 190305 Technical documentation | High level | 1/2" | 150 mm |