1/4" dual ratchet handle, ALYCO
- Ratchet Wrench for tightening with 1/4" sockets. A short ergonomic handle allowing tightening in confined spaces
- Very precise tightening thanks to the 72-tooth mechanism, which allows tightening with a very exact 5-degree step
- Ratchet made of chrome-vanadium steel, maximum quality and wear resistance. Very precise tightening, without damaging either the socket or the screwdriver bit
- Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life. Chrome surface treatment extending its service life and preventing oxidation
- Can be used with 1/4" square-drive sockets and a T-handle. Thanks to the bit holder, it can be used with any type of bit drive (flat, PH, PZ, Torx, etc.). It can also be used with extension bars, a universal joint, adapters, etc. to increase its functions.
Dual Ratchet Wrench for tightening with 1/4" male square-drive sockets and a 1/4" screwdriver bit holder. Short series, 112mm.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/4" square-drive sockets. And also for 1/4" screwdriver bits.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
Adding to this versatility is the 1/4" screwdriver bit holder, which allows tightening of hexagonal nuts on one side and screwdriving for nuts with any type of drive, depending on the bit fitted.
The ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
Durable, corrosion-resistant, with a non-slip handle, suited to long working periods.
Widely used for holding or removing hexagonal-head screws, standard nuts and nuts with flat, PH, PZ drives, etc.
Very suitable for tightening nuts in industry, industrial maintenance and domestic use.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/4" square-drive sockets. And also for 1/4" screwdriver bits.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
Adding to this versatility is the 1/4" screwdriver bit holder, which allows tightening of hexagonal nuts on one side and screwdriving for nuts with any type of drive, depending on the bit fitted.
The ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
Durable, corrosion-resistant, with a non-slip handle, suited to long working periods.
Widely used for holding or removing hexagonal-head screws, standard nuts and nuts with flat, PH, PZ drives, etc.
Very suitable for tightening nuts in industry, industrial maintenance and domestic use.
| Product | Availability | Drive square size |
Length (in mm) |
|
|---|---|---|---|---|
| 1/4 DR. DUAL RATCHET 72 TEETH Code 192133 Technical documentation | High level | 1/4" | 112 |