Alyco

Ficha técnica

MASONRY DRILL SDS PLUS SHANK 8x260MM

Code
122148
EAN-13
8421504221487
Diameter (in mm) Length (in mm)
8x260
  • SDS-Plus drill bit, suitable for working on hard surfaces such as concrete, brick, stone, tile, marble, granite or slate.
  • It has a 4-flute design that helps clear away dust.
  • It is made from alloyed, hardened steel and has a tungsten carbide tip.
  • This bit is suitable for hammer-drilling work.
  • It has a shot-blasted finish and a surface oil coating that prevents rusting.

Go to main product

MASONRY DRILL SDS PLUS SHANK 12x160MM

Code
122112
EAN-13
8421504221128
Diameter (in mm) Length (in mm)
12 160

MASONRY DRILL SDS PLUS SHANK 13x160MM

Code
122113
EAN-13
8421504221135
Diameter (in mm) Length (in mm)
13x160

MASONRY DRILL SDS PLUS SHANK 14x160MM

Code
122114
EAN-13
8421504221142
Diameter (in mm) Length (in mm)
14 160

MASONRY DRILL SDS PLUS SHANK 15x160MM

Code
122115
EAN-13
8421504221159
Diameter (in mm) Length (in mm)
15x160

MASONRY DRILL SDS PLUS SHANK 16x160MM

Code
122116
EAN-13
8421504221166
Diameter (in mm) Length (in mm)
16 160

MASONRY DRILL SDS PLUS SHANK 17x210MM

Code
122117
EAN-13
8421504221173
Diameter (in mm) Length (in mm)
17x210

MASONRY DRILL SDS PLUS SHANK 18x210MM

Code
122118
EAN-13
8421504221180
Diameter (in mm) Length (in mm)
18 210

MASONRY DRILL SDS PLUS SHANK 19x210MM

Code
122119
EAN-13
8421504221197
Diameter (in mm) Length (in mm)
19x210

MASONRY DRILL SDS PLUS SHANK 20x210MM

Code
122120
EAN-13
8421504221203
Diameter (in mm) Length (in mm)
20 210

MASONRY DRILL SDS PLUS SHANK 6x200MM

Code
122126
EAN-13
8421504221265
Diameter (in mm) Length (in mm)
6 210

MASONRY DRILL SDS PLUS SHANK 8x210MM

Code
122128
EAN-13
8421504221289
Diameter (in mm) Length (in mm)
8 210

MASONRY DRILL SDS PLUS SHANK 10x210MM

Code
122130
EAN-13
8421504221302
Diameter (in mm) Length (in mm)
10 210

MASONRY DRILL SDS PLUS SHANK 12x210MM

Code
122132
EAN-13
8421504221326
Diameter (in mm) Length (in mm)
12 210

MASONRY DRILL SDS PLUS SHANK 14x210MM

Code
122134
EAN-13
8421504221340
Diameter (in mm) Length (in mm)
14x210

MASONRY DRILL SDS PLUS SHANK 16x210MM

Code
122136
EAN-13
8421504221364
Diameter (in mm) Length (in mm)
16 210

MASONRY DRILL SDS PLUS SHANK 6x260MM

Code
122146
EAN-13
8421504221463
Diameter (in mm) Length (in mm)
6x260

MASONRY DRILL SDS PLUS SHANK 10x260MM

Code
122150
EAN-13
8421504221500
Diameter (in mm) Length (in mm)
10 260

MASONRY DRILL SDS PLUS SHANK 12x260MM

Code
122152
EAN-13
8421504221524
Diameter (in mm) Length (in mm)
12 260

MASONRY DRILL SDS PLUS SHANK 14x260MM

Code
122154
EAN-13
8421504221548
Diameter (in mm) Length (in mm)
14x260

MASONRY DRILL SDS PLUS SHANK 16x260MM

Code
122156
EAN-13
8421504221562
Diameter (in mm) Length (in mm)
16 260

MASONRY DRILL SDS PLUS SHANK 4x110MM

Code
122104
EAN-13
8421504221043
Diameter (in mm) Length (in mm)
4x110

MASONRY DRILL SDS PLUS SHANK 5x110MM

Code
122105
EAN-13
8421504221050
Diameter (in mm) Length (in mm)
5 110

MASONRY DRILL SDS PLUS SHANK 6x110MM

Code
122106
EAN-13
8421504221067
Diameter (in mm) Length (in mm)
6 110

MASONRY DRILL SDS PLUS SHANK 7x110MM

Code
122107
EAN-13
8421504221074
Diameter (in mm) Length (in mm)
7x110 110

MASONRY DRILL SDS PLUS SHANK 8x110MM

Code
122108
EAN-13
8421504221081
Diameter (in mm) Length (in mm)
8 110

MASONRY DRILL SDS PLUS SHANK 9x110MM

Code
122109
EAN-13
8421504221098
Diameter (in mm) Length (in mm)
9x110

MASONRY DRILL SDS PLUS SHANK 10x110MM

Code
122110
EAN-13
8421504221104
Diameter (in mm) Length (in mm)
10 110

MASONRY DRILL SDS PLUS SHANK 11x160MM

Code
122111
EAN-13
8421504221111
Diameter (in mm) Length (in mm)
11x160

Data sheet

  • SDS-Plus drill bit, suitable for working on hard surfaces such as concrete, brick, stone, tile, marble, granite or slate.
  • It has a 4-flute design that helps clear away dust.
  • It is made from alloyed, hardened steel and has a tungsten carbide tip.
  • This bit is suitable for hammer-drilling work.
  • It has a shot-blasted finish and a surface oil coating that prevents rusting.

    • Overview

    Drill bit suitable for work with power tools and rotary hammers on very hard materials such as concrete, brick, stone, tile, marble, granite and slate.

    The body of this bit is made from alloy steel, hardened to between 42 and 50 HRC; these characteristics give it high strength and allow it to work effectively on hard materials without wearing down. The tip is made from tungsten carbide, a material with great cutting capacity. It has a four-flute spiral that helps clear away dust, which increases drilling speed and extends the tool's service life. This design reduces wear and torsional stress.

    This bit has an SDS-Plus fixing system: 3 flutes that allow the hammer action to strike the bit without it coming loose. To prevent rusting, this bit has a shot-blasted finish.

    The quality of the materials it is made from make it perfect for working with precision and efficiency in professional construction work, including hammer-drilling. It is not suitable for drilling metal.

    DIN 8039 standard.

    Technical characteristics

    Finishes

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.0790 26

    Documents

    • Certification 1