Alyco

Ficha técnica

RATCHET 1/4' DUAL

Code
170712
EAN-13
8421504707127
Drive square size Length
1/4" 105 mm
  • Short Ratchet Wrench for tightening with a 1/4" square drive and 1/4" screwdriver bits, made of chrome-vanadium steel, maximum durability and wear resistance. Very useful for tightening nuts with hexagonal sockets or bit sockets, and screwdriver bits.
  • The ratchet wrench is chrome-plated to give it the best possible protection against oxidation. This significantly increases the ratchet's service life and ensures a tightening capacity exceeding DIN standards throughout its service life.
  • The ratchet wrench has a very precise tightening mechanism, with a high tightening capacity. 72-tooth ratchet with a 5° angle, giving greater strength to the ratchet's teeth. The square drive has a ball that allows the socket to fit perfectly, providing great safety and preventing the socket from falling off accidentally.
  • A short, ergonomic two-material handle with non-slip rubber that makes gripping easier, provides comfort and ensures force transmission. The tightening-direction reverser and socket ejector allow different forms of tightening, and leave the hand free for other tasks.
  • Can be used for tightening with hexagonal sockets, bit sockets, extension bars, universal joints, bit adapters, etc. Many versatile options. Very suitable for fitters, installers, mechanics, domestic use, etc.

Go to main product

Data sheet

  • Short Ratchet Wrench for tightening with a 1/4" square drive and 1/4" screwdriver bits, made of chrome-vanadium steel, maximum durability and wear resistance. Very useful for tightening nuts with hexagonal sockets or bit sockets, and screwdriver bits.
  • The ratchet wrench is chrome-plated to give it the best possible protection against oxidation. This significantly increases the ratchet's service life and ensures a tightening capacity exceeding DIN standards throughout its service life.
  • The ratchet wrench has a very precise tightening mechanism, with a high tightening capacity. 72-tooth ratchet with a 5° angle, giving greater strength to the ratchet's teeth. The square drive has a ball that allows the socket to fit perfectly, providing great safety and preventing the socket from falling off accidentally.
  • A short, ergonomic two-material handle with non-slip rubber that makes gripping easier, provides comfort and ensures force transmission. The tightening-direction reverser and socket ejector allow different forms of tightening, and leave the hand free for other tasks.
  • Can be used for tightening with hexagonal sockets, bit sockets, extension bars, universal joints, bit adapters, etc. Many versatile options. Very suitable for fitters, installers, mechanics, domestic use, etc.

    • Overview

    Short Ratchet Wrench (10cm) made of chrome-vanadium steel, with heat treatment and chrome surface treatment, with a 72-tooth rotation mechanism, with a step every 5 degrees, giving it maximum precision.
    The short ratchet is useful because of its small size, for carrying in a pocket, and for tightening in hard-to-manoeuvre areas.
    The ratchet has a reverser and socket ejector, giving it very high reliability and tightening capacity.
    On the other side, the 1/4" bit holder allows tightening with any type of bit (flat, PH, PZ, Torx, etc.)
    A multifunctional tightening element, with the ability to tighten clockwise and anticlockwise.
    A very precise square drive, which fits perfectly with the socket, with a retention ball that prevents the socket from separating or falling off.
    An ergonomic two-material non-slip rubber handle that makes gripping easier, provides comfort, and ensures optimal transmission of force to the screws. It has a hook at the end of the handle for storage.
    Very useful for tightening in mechanics, maintenance, installation work, DIY, etc.

    Technical characteristics

    Wrench type:
    Dual ratchet. 1/4" drive square on one side and adapter for 1/4" hex bits on the other
    Use:
    Used for tightening or removing screws by fitting sockets or accessories (extension bars, universal joints, adapters…), with a 1/4" female square drive.
    Special features:
    Short, very lightweight ratchet wrench. Its main advantage is how little space it takes up and how easy it is to carry. Thanks to its small size, it is very well suited to reaching places that standard-length ratchet wrenches cannot access. It also allows screwdriver bits to be fitted directly thanks to its 1/4" hexagonal shank.
    Number of teeth / swing angle:
    72 teeth / 5º of rotation per tooth
    Head size:
    Width 26 mm / height 25 mm
    Head material:
    Closed head. Internal mechanism made of chrome-vanadium steel
    Maximum clamping force:
    82 N.m / 8.36 kg.m (32% above DIN 62 N.m standard)
    Reversible:
    Yes. Easy-to-use reverse lever, thumb-operated.
    Handle type:
    Hidden, as the grip extends to the head area.
    Grip shape:
    Oval, ergonomic shape. Large handle width of 28 mm for more comfortable use.
    Grip material:
    Bi-material grip. Hand-contact area in non-slip rubber
    Hole for hang:
    Yes. Φ10mm hole at the end of the handle.

    Finishes

    Color:
    Orange/grey handle and grey/black body
    Material:
    Chrome-vanadium steel body and bi-material handle
    Finish:
    Chrome-plated body

    Certifications

    Certification:
    DIN 3122

    Product dimensions

    Weight (kg) Length (cm) Width (cm) Height (cm)
    0.1100 10.50 2.50 2.50

    Documents

    • Certification 1