1/2" extendable ratchet handle with flexible head, ALYCO
- Ratchet Wrench for tightening with 1/2" sockets. An extendable ergonomic handle allowing high tightening torques and access to hard-to-reach spaces. The flexible head allows angled tightening in hard-to-tighten areas.
- Very precise tightening thanks to the 72-tooth mechanism, which allows tightening with a very exact 5-degree step.
- Ratchet made of chrome-vanadium steel, maximum quality and wear resistance. High tightening torque, allowing high-force tightening without damaging the wrench.
- Made of heat-treated steel, giving it greater strength and tightening capacity. High dimensional accuracy, which prevents the socket and the nut from suffering during tightening and extends its service life. Chrome surface treatment extending its service life and preventing oxidation.
Ratchet Wrench for tightening with 1/2" male square-drive sockets. With an extendable handle and flexible head.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/2" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
The head has a pivoting mechanism allowing tightening at angles from 90° to -90°, with 10 fixed adjustment positions. This allows angled tightening, which can be useful in hard-to-reach spaces.
The extendable, ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening. It has 6 extension adjustment points, thanks to the perforations in the handle.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
Durable, corrosion-resistant, with a non-slip handle, high torque, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, construction, industrial maintenance, and even domestic use.
Please use this product with caution and make sure to follow all the necessary safety measures to ensure safe and effective use.
These ratchet wrenches are made of chrome-vanadium steel, giving them greater strength, tightening capacity and service life.
The metal part of the ratchets, during manufacture, is heat-treated, giving them a greater tightening capacity, preventing cracks and extending their service life.
At the end of the manufacturing process, they are given a chrome surface treatment, which prevents corrosion and extends their service life.
These ratchet wrenches are for tightening with 1/2" square-drive sockets.
They comply with the DIN 3122 and ISO 3315 standards.
The ratchet has a 72-tooth rotation mechanism, so each rotation step corresponds to 5 degrees of circumference, which gives fine, precise tightening.
It has a lever to change the direction of rotation, making it very convenient for tightening with a small rotation angle or in confined spaces.
The head has a pivoting mechanism allowing tightening at angles from 90° to -90°, with 10 fixed adjustment positions. This allows angled tightening, which can be useful in hard-to-reach spaces.
The extendable, ergonomic two-material handle allows maximum force to be applied without tiring the hand, even during intensive repetitive tightening. It has 6 extension adjustment points, thanks to the perforations in the handle.
The ratchet produces very precise tightening with high force transmission, without wearing down the socket, which fits perfectly onto the ratchet's male square drive.
The square drive's spring-loaded ball fits into a recess on the socket to prevent it from falling off accidentally and to keep the other hand free. Pressing the ejector retracts the ball, allowing the socket to be easily removed.
Tightening of the ratchet can be extended with an extension bar, a flexible extension bar and a universal joint.
It can be used with a bit adapter for use with bits.
Durable, corrosion-resistant, with a non-slip handle, high torque, suited to long working periods.
Widely used for holding or removing hexagonal-head screws and nuts.
Very suitable for tightening nuts in industry, construction, industrial maintenance, and even domestic use.
Please use this product with caution and make sure to follow all the necessary safety measures to ensure safe and effective use.
| Product | Availability | Drive square size |
Length |
|
|---|---|---|---|---|
| 1/2 DR. FLEXIBLE EXTEND. RATCHET HANDLE Code 192347 Technical documentation | Out of stock Consultar con Alyco | 1/2" | 350 - 490 mm |